|
| C-250 |
|
| C-253 |
C Targets are designed with an extended base to aid in removal after the test cycle. The materials
are KAPTON® film with a .002" SILICONE pressure sensitive adhesive (psa).
This series has been used successfully in thermal cycles of ±300°F.
|
| CA-250 |
|
| CA-253 |
CA Targets have the same KAPTON® base material as the C series, but the A
denotes a .002" ACRYLIC psa. The CA targets have also been used
for thermal cycles of ±300°F.
The advantage in the acrylic psa is that it passes the NASA out gassing test.
|
| Choose your own spacing per roll. |
Both the C and CA targets can be pre-spaced in rolls of 1000 with
spacing of your choosing. The targets can then be applied in strips. The carrier liner is burnished to adhere
the targets to the substrate, then the liner can be removed ( at a low angle of peel ) leaving the targets pre-spaced on the
structure.
Retroreflector sizes are available from 3/16" through 1". Metric retroreflector sizes are available from
3 mm through 25 mm. Custom retroreflector size variations are available within the C or CA series. To designate the retroreflective material that allows the target to function at 500°F add
an "H" (i.e. C becomes CH and CA becomes CAH).
|
