|
H Targets employ a Black KAPTON® base for increased contrast with the reflector.
This series of targets has a base adhesive layer of .001" SILICONE pressure sensitive adhesive (psa). This
series is suited for thermal evaluations of ±300°F.
HA Targets offer the Black KAPTON® layer for contrast like the H
series, the A denotes an adhesive layer of .001" ACRYLIC psa. The thinner
adhesive layer reduces the adhesion level attained, enabling easier removal. The series offers the high contrast
of the Black KAPTON®, the ability to fuction in a thermal cycle of ±300°F, and a base adhesive
that will pass the NASA out gassing test.
|
| Choose your own spacing per roll. |
Both the H an HA target series can be pre-spaced in rolls of 1000,
with a spacing of your choice. The targets are applied in strips. The carrier liner is burnished to adhere
the targets to the substrate, then the carrier liner is removed (with a low angle of peel) leaving the targets pre-spaced
on the structure.
Retroreflectors are available from 3/16" through 1" in size. Metric retroreflector sizes available are 3 mm through
25 mm. Custom retroreflector sizes variations are available in the H and HA series.
To designate the retroreflective material that allows the target to function at 500°F add an "H" (i.e. H becomes HH and HA
becomes HAH).
|
