|
| J-250 |
|
| J-253 |
J Targets have a KAPTON® backing and are designed to be easier to remove because of the .001"
SILICONE pressure sensitive adhesive ( psa ). This series has the ability to withstand a ±300°F thermal cycle.
|
| JA-250 |
|
| JA-253 |
JA Targets offer an ACRYLIC pressure sensitive adhesive .001" thick that has the
ability to pass the NASA out gassing test. This series offers easier removal after the thermal cyle of ±300°F.
|
| Choose your own spacing per roll.. |
Both the J and JA series targets can be pre-spaced in rolls of 1000,
with a spacing of your choice. The targets are applied in strips. The carrier liner is burnished to adhere the
targets to the substrate, then the carrier liner is removed (with a low angle of peel) leaving the targets pre-spaced on the
structure.
Retroreflectors are available from 3/16" through 1" in size. Metric retroreflectors are available from 3 mm through
25 mm. Custom retroreflectors are available within the J and JA series. To
designate the retroreflective material that allows the target to function at 500°F add an "H" (i.e. J becomes JH and JA becomes
JAH).
|
