|
| M-250 |
|
| M-253 |
M Targets are designed with an extended base to aid in removal after the test cycle.
The Black KAPTON® allows the reflector to be picked up by providing its own contrast and not relying
on the substrate (great for testing white objects). The M Series uses a .002" SILICONE pressure
sensitive adhesive (psa).
This series should withstand a thermal cycle of ±300°F.
|
| MA-250 |
|
| MA-253 |
MA Targets have the same structure as the M series , but the A
denotes a .002" ACRYLIC psa.
The MA targets should work within a ±300°F thermal cycle as well as pass the
NASA out gassing test.
|
| Choose Your Own Spacing per Roll |
Both the M and MA targets can be pre-spaced in rolls of 1000 with
a spacing of your choosing. The targets are applied in strips. The carrier liner is burnished to adhere the targets
to the substrate, then the carrier liner can be removed (with a low angle of peel). Leaving the targets pre-spaced on
the structure.
Retroreflectors are available from 3/16" through 1" in size. Metric retroreflectors are available from 3 mm through
25 mm. Custom retroreflector size varitations are available within the M and MA series. To
designate the retroreflective material that allows the target to function at 500°F add an "H" (i.e. M becomes MH and MA becomes
MAH).
|
